How to root Samsung Galaxy S7 SM-G930F via CF-Autoroot [Odin Process]


Are you the proud owner of Galaxy S7 G930F? If yes, then we have a great news for you, now you can safely root your Galaxy S7 on latest firmware, in this detailed tutorial we are going to show the step by step process to root latest flagship Galaxy S7 SM-G930F on latest firmware, thanks to Chainfire that always remains one step ahead for providing the root package to devices updates on latest firmware, we have already posted same guide for other Galaxy devices. The stock firmware is always un-rooted and factory settings are enabled by the manufacturer even if your device is rooted, flashing the stock firmware will wipe the root access. In this guide you would be able to root your Galaxy S7 SM-G930F on Android 6.0.1 Marshmallow stock firmware.

The root package contains custom kernel which not only includes SuperSu along root but many goodies are packed inside it including better memory optimization. Although the root process is never recommended by the device manufacturer as it’s a custom process and wipes all the instructions set for your device itself by the manufacturer. By gaining root access on your Galaxy S7 SM-G930F you take administrative control of your Android device and lets you enhance your device performance and can add more tweaks and mod. You can make changing in your system files, install custom recovery to flash custom ROMs or mods and much more.

Before we proceed and start the rooting process lets have a look at benefits of rooted device.

Benefits of Rooting Galaxy S7 SM-G930F

Overclock CPU frequency: By gaining root access on your device you can overclock the CPU frequency for example, if your device has maximum of 1000MHz processor speed you can enhance it too 1200MHz and you can feel a difference in performance. But it is not always recommended to overclock CPU more then it’s maximum power.

Bloatware kill: Rooting allows you to remove non usable pre-installed apps by provided by device manufacturer. Removing these apps will give you more RAM and free storage space.

Battery Life Enhancement: You can stop/ remove the unwanted back-end services permanently, because it always keeps the processor awake which results in much battery drain.

Custom Rom: You can install a custom firmware only on a rooted device because some software demands a rooted device to flash a custom recovery (a software use to flash custom ROM in a device).

Modification in System: Rooting allows you modify the system settings and add or remove the system files. Advance file explorers with an ability to gain root access are used in this operation, even you can also made the third party apps permanent in the system files directory.
Now let’s move forward and follow the tutorial to root your Galaxy S7 SM-G930F.

Before you begin:

Disclaimer: This tutorial includes multiple operations including Custom Rom, Custom recovery and root. Follow the guide on your own risk, we are not responsible if you brick or damage your device however the chances of bricking a device are rare but you have to pay full attention on the complete guide to avoid any issues and difficulties while performing any of the above mentioned operation.

  • Enable USB Debugging (Settings >> Developer Options >> USB debugging)
  • Your phone battery should be charged minimum 60%

Download these files:

How to root Galaxy S7 SM-G930F on Android 6.0.1 Marshmallow firmware

Just follow the below steps in sequence to obtain root on your Galaxy S7 SM-G930F.

  • Click Odin 3.10.exe to run the Odin tool.
  • Now boot your device into Download Mode, to do so turn off your device properly and turn it on again by pressing and holding Home Button + Volume Down + Power Key simultaneously until you see a warning now press Volume up to enter Download Mode.
  • Connect your device to PC via USB cable.
  • If everything goes well Odin will detect your device and the ID:COM box should turn blue which indicates that your device has been successfully added.
  • Please make sure “Auto Reboot & F.Reset Time” options are checked in the Odin screen.


  • In Odin click the AP tab and select the TAR files for your device.
  • Hit the start button at the bottom and wait for the installation process to complete.


  • Once the process is completed you will see a “PASS” message in the ID:COM box.
  • Your device will automatically reboot.

That’s it! You have successfully rooted Galaxy S7 SM-G930F on Android 6.0.1 Marshmallow. If you have any query feel free to contact us by posting your comment in the below provided comment section. Follow us on Facebook/Twitter/Google+ for future update.

A Software Engineer who loves to hang around latest gadgets and writes his own experiences to get the best possible and accurate information.

We will be happy to hear your thoughts

Leave a reply