Android Nougat based OxygenOS 4.0.3 OTA for OnePlus 3T is now available. The OxygenOS 4.0.3 for OnePlus 3T has brought multiple new features inside it, for details you can see the change log below. The update is now available to download so if you are the proud owner of OnePlus 3T then download the OxygenOS 4.0.3 Nougat OTA for your device and enjoy the all new features on your device. Below we have mentioned the procedure to update your OnePlus 3T on OxygenOS 4.0.3, just go ahead and follow them to easily install the latest OxygenOS 4.0.3 on your OnePlus 3T.
How to install OxygenOS 4.0.3 on OnePlus 3T
Before you begin:
Disclaimer: This tutorial includes multiple operations which include flashing Stock Firmware. Follow the guide on your own risk, we are not responsible if you brick or damage your device however the chances of bricking a device are rare but you have to pay full attention on the complete guide to avoid any issues and difficulties while performing any of the above mentioned operation.
Your phone battery should be charged minimum 80%
Download OnePlus USB drivers, necessary for PC-Phone connection
Procedure to install OxygenOS 4.0.3 on OnePlus 3T via Stock Recovery (Non Rooted devices)
Copy the OxygenOS 4.0.3 OTA zip file to the internal memory of your OnePlus 3T
Turn off your device and reboot into recovery mode.
Once in recovery, use Vol up or Vol down button to navigate and select apply updates.
Browse and select update zip file and flash it.
Once done reboot your device.
How to install OxygenOS 4.0.3 Nougat OTA on OnePlus 3T
Download and Extract adb fastboot.
Download the firmware from the link provided below.
Now connect your device to the PC using USB cable.
Open the adb-and-fastboot folder you extracted earlier and copy the OxygenOS 4.0.3 Nougat OTA firmware zip inside the folder.
Inside adb-and-fastboot folder, press SHIFT and Right-Click on an empty space inside the same folder.
Click on Open command prompt here as shown in picture below.
Issue the following command to reboot your device into recovery mode
adb reboot recovery
Once in recovery mode then choose “install from USB” and tap OK. It will enable the adb sideload mode.
Then type the following command to start the flashing process.
adb sideload ota.zip
One done with the process just reboot your device or simple type “fastboot reboot”
Download OxygenOS 4.0.3 Nougat OTA for OnePlus 3T and rename it to ota.zip. Link
That’s it! If you have successfully flashed the OxygenOS 4.0.3 Nougat OTA firmware on OnePlus 3T please let us know. For any queries comment us in the below provided space.